RGP Fitting Simulator
See the pattern.
Watch the fit.
It’s one thing to spot central pooling on a lecture slide. It feels different when the lens moves after a blink and you have to decide what to write down. Have a go at both here.
Free to try. No account needed. For optometry students, CLiP trainees and anyone revisiting corneal RGP fitting.
When “the lens looks steep” is only the start
You can’t choose the corneal shape of your clinical partner, or which patient books into your clinic. Sometimes it helps to see two clear examples side by side before trying to make sense of a subtler fit in practice.
Here, you can repeat a blink, switch views and take a moment to describe what you saw. If you can explain where the lens sits, how it moves and where the fluorescein collects, you’ve got more to discuss with your supervisor than a fit label alone.
Try the free RGP Fitting Simulator
Pick Steep fit or Flat fit. Start in white light and press Blink. Compare the two fits before switching to Fluorescein.
A little guide to the demo. Look left and right, then return to centre to compare the patterns. Try increasing peripheral clearance or showing a lens chip. The grey controls show some of the extra options in the full simulator.
On a phone, use the simulator’s Full screen button if you’d like more room.
The demo loads when you press Start.
For education and supervised revision. The visual patterns and lens movement are illustrative and uncalibrated. Clinical lens selection requires an individual assessment.
Give yourself three things to look for
1. Where does it sit?
In white light, look straight ahead first. Where is the lens relative to the pupil and limbus? Then look left and right. Does its position relative to the eye change?
2. What happens after a blink?
Follow the lens edge as the lid opens. How far does it appear to travel and where does it settle? Try the other fit with the eye back in primary gaze.
3. Where is the fluorescein?
Check the centre, mid-periphery and edge. Increase peripheral clearance and see which part of the pattern changes. Then switch back to compare.
Turn on Show lens chip and look for a small break in the outline. Start in white light. Could you describe where it is without pointing to the screen?
What do steep and flat RGP fits look like?
Fluorescein in the tear layer beneath a corneal RGP lens helps you see its relationship to the cornea. A brighter region usually suggests pooling and a darker region may suggest bearing. Compare adjacent zones and meridians. Timing after instillation also affects the appearance.[1][2]
| Fit | Centre | Mid-periphery and edge |
|---|---|---|
| Steep | Brighter central pooling. | A darker mid-peripheral zone may surround the pool. Edge clearance can be reduced depending on the design. |
| Flat | Darker central bearing. | More pooling may be visible outside the centre. Edge clearance can be greater depending on the design. |
| Near alignment | A more even pattern through the central zone. | Less contrast across the zones, with a visible band of edge clearance. Use the lens design and the dynamic assessment to interpret it. |
These are typical appearances. Lens design, corneal shape, centration and lids can all change the picture. The free demo includes the steep and flat examples.[1][3][4]
Go further with the full RGP Fitting Simulator
Once you’ve compared the two examples, the full simulator gives you more room to see what happens when you change the fit yourself.
| What you can explore | Free demo | Full version |
|---|---|---|
| Starting fits and parameters | Steep and flat, with an illustrative peripheral clearance adjustment | More starting fits and adjustable lens and corneal parameters |
| Dynamic assessment | Normal blink and left, centre and right gaze | Nine positions of gaze, slow blink and on-screen calipers |
| Lens assessment | White light, fluorescein and a lens chip | More lens conditions and assessment controls |
| Teaching and revision | Observation prompts on this page | Challenge cases, teaching and reflection panels |
Keep practising with The Eye Care Advocate
Membership includes all simulators, courses, networking with the community, Points of Light mentoring, MCQs, case files and access to my book, History & Symptoms: The Eye Examination.
£15 a month or £150 a year
Both plans include the same resources. The full simulator is accessed inside the community.
RGP lens fitting questions
What does RGP stand for?
RGP stands for rigid gas permeable. This demo shows a corneal RGP lens, a rigid contact lens that sits over the cornea.
What is the difference between static and dynamic RGP fit?
Static assessment describes the lens-to-cornea relationship from the fluorescein pattern when the lens is relatively still. Dynamic assessment considers how the lens moves with blinking and changes of gaze, and where it settles. Record centration alongside these findings.[1]
What does central pooling mean on fluorescein?
It means fluorescein is collecting in the tear layer under the centre of the lens. In the simple steep fit shown here it appears as a brighter central region. Interpret it alongside the surrounding zones and lens position.[1][4]
Does a dark area always mean the lens is touching the cornea?
A darker area can indicate a thinner tear layer and possible bearing. Consider the rest of the pattern, the illumination and the time since fluorescein was applied before deciding what you are seeing.[1][2]
Can I use the RGP demo to revise for CLiP?
Yes. Use it to rehearse describing a fluorescein pattern and post-blink movement, then discuss how you would assess and record the fit with your supervisor. Check the College’s current CLiP resources for your assessment and case logging requirements.[6]
How much can I change in the free demo?
Choose a steep or flat example, switch illumination, blink, look left or right and return to centre. You can also increase illustrative peripheral clearance and show a chipped edge. The full simulator is available in the premium community.
Take it into your next contact lens clinic
Try saying what you saw before you give the fit a label. If you were handing the case over to someone who couldn’t see the lens, what would they need to know?
Try a one-minute handover
“In primary gaze the lens sits ___. On blink it moves ___ and settles ___. With fluorescein I see ___ centrally, ___ in the mid-periphery and ___ at the edge. The next thing I’d check is ___.”
Compare your two handovers. What changed your impression more, the pattern or the movement? What would you ask your supervisor to check with you?
A supervised contact lens fitting also involves preliminary measurements, lens selection, an on-eye assessment and patient instruction. The demo helps you practise the observation and description part. For CLiP requirements, use your current handbook and supervisor guidance.[5][6]
References
- Wolffsohn JS, van der Worp E, de Brabander J and the GP Consensus Group (2013). Consensus on recording of gas permeable contact lens fit. Contact Lens and Anterior Eye 36(6): 299–303. Journal article
- Wolffsohn JS, Tharoo A and Lakhlani N (2015). Optimal time following fluorescein instillation to evaluate rigid gas permeable contact lens fit. Contact Lens and Anterior Eye 38(2): 110–114. Journal article
- Wolffsohn JS et al. (2021). CLEAR – Evidence-based contact lens practice. Contact Lens and Anterior Eye 44(2): 368–397. Journal article
- Bausch + Lomb. Boston lens materials professional fitting guide.
- The College of Optometrists. Fitting contact lenses. Guidance for professional practice.
- The College of Optometrists. Clinical Learning in Practice (CLiP) resources.

